View current configuration and Check current configuration are both used to retrieve information on the current state of the Zorp firewall(s).

View current configuration displays the configurations of the component selected in the Configuration tree on the selected host. This information comes from the ZMS configuration database, which is not necessarily the same as the actual settings on the selected host – when changes are already committed, but not yet uploaded. For example, if the ZMS_Host > Networking component is selected and then View current configuration is used, the following will be displayed:

Figure 3.16. Networking configuration on ZMS_Host

It is a file-by-file listing of the active configuration on the selected host. Note that it is not necessarily the same configuration that is stored in the ZMS database: after a commit but prior to an upload event they can differ significantly. To query this difference, click Check current configuration. Using the Linux diff utility by default, it compares configurations stored in the ZMS database with the configurations currently active on the selected host.

Figure 3.17. Checking current configurations

The differences are marked in red, otherwise the normal output of diff is displayed, with + and – signs designating data from the host and from the database, respectively. The diff command can be replaced with another utility of choice under the Management Server component. For details, see Chapter 13, Advanced ZMS and Agent configuration.