A route has the following parameters:
: It is the IP address of the network.
: It is the Netmask of the network.
Note The IP address and netmask parameters are displayed in the column of the routing entries list.
: It is the IP address of the gateway to be used for transmitting the packages.
: It is the Ethernet interface to be used for transmitting the packages. This parameter must be selected from the combobox listing the configured interfaces.
: It is an optional parameter to define a metric for the route. The metric is an integer from the
0 – 32766range.: These notes describe what this entry is used for.
The above parameters are interpreted the following way: messages sent to the Address/Netmask network should be delivered through Gateway using Interface.
New entries into the routing table can be added by clicking the button of the control bar; existing entries can be modified by clicking . The updated routing tables take effect only after the new configuration is uploaded to the host, and the routing tables are reloaded using the buttons of the control bar.
Copyright: © 2021 Balasys IT Security
Send your comments to support@balasys.hu
